From b28f97f3526859633fde603764b827389279d10f Mon Sep 17 00:00:00 2001 From: Denis Chevalier Date: Mon, 10 Aug 2026 22:32:38 +0200 Subject: extract figures in separate files --- tables/pcb-interconnect-zones-zone-a.typ | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 tables/pcb-interconnect-zones-zone-a.typ (limited to 'tables/pcb-interconnect-zones-zone-a.typ') diff --git a/tables/pcb-interconnect-zones-zone-a.typ b/tables/pcb-interconnect-zones-zone-a.typ new file mode 100644 index 0000000..041190f --- /dev/null +++ b/tables/pcb-interconnect-zones-zone-a.typ @@ -0,0 +1,19 @@ +#import "../lib/unify.typ": qty, qtyrange + +#figure( + table( + columns: 2, + table.header([Parameter], [Value]), + [Location], [Rear $qty(20, "mm")$ of PCB ($Y = qtyrange(0, 20, "mm")$)], + + [Function], [Connection to DB-25 backplane connector and rear BNC], + [Connector], + [ + / Power: pluggable terminal block (e.g. Phoenix Contact MSTB $qty(3.5, "mm")$ or latching header (e.g Molex KK $qty(3.96, "mm")$). + / Master oscillator (optional): The rear BNC connects to the PCB via a short ($lt qty(50, "mm")$) $qty(50, "ohm")$ coaxial pigtail (RG-174 or RG-316) soldered to dedicated RF pads or a u.FL/SMA connector on the PCB edge. + ], + + [Wire gauge], [$qtyrange(22, 24, "AWG")$ for power, $qty(26, "AWG")$ for signals], + ), + caption: [PCB interconnect zones: zone A], +) -- cgit