extract figures in separate files

1 files changed, 32 insertions, 0 deletions

diff --git a/tables/circuit-and-component-parameters.typ b/tables/circuit-and-component-parameters.typ
new file mode 100644
index 0000000..caa0756
--- /dev/null
+++ b/tables/circuit-and-component-parameters.typ
@@ -0,0 +1,32 @@
+#import "../lib/unify.typ": unit
+
+#figure(
+  table(
+    columns: 3,
+    table.header([Symbol], [Definition], [Typical unit]),
+    [$G$], [Gain (closed-loop)], [dimensionless or $unit("dB")$],
+    [$A$], [Gain (open-loop)], [dimensionless or $unit("dB")$],
+    [$A_"OL"$], [Open-loop gain (explicit)], [dimensionless],
+    [$beta$], [Feedback factor], [dimensionless],
+    [$A beta$], [Loop gain], [dimensionless],
+    [$H$], [Transfer function], [dimensionless],
+    [$R_f$], [Feedback resistor], [$unit("ohm")$],
+    [$R_"in"$], [Input resistor], [$unit("ohm")$],
+    [$Z_"in"$], [Input impedance], [$unit("ohm")$],
+    [$Z_"out"$], [Output impedance], [$unit("ohm")$],
+    [$upright("GBW")$], [Gain-bandwidth product], [$unit("Hz")$],
+    [$upright("SR")$], [Slew rate], [$unit("volt per micro second")$],
+    [$upright("CMRR")$], [Common-mode rejection ration], [$unit("dB")$],
+    [$upright("PSRR")$], [Power supply rejection ratio], [$unit("dB")$],
+    [$upright("TC")$], [Temperature coefficient], [$unit("ppm per celsius")$],
+
+    [$V_"CR"$], [Voltage coefficient of resistance], [$unit("ppm per volt")$],
+
+    [$V_"CC"$], [Voltage coefficient of capacitance], [$unit("ppm per volt")$],
+
+    [$upright("DA")$], [Dielectric absorption], [$unit("percent")$],
+    [$S$], [Seebeck coefficient], [$unit("micro volt per celsius")$],
+    [$theta$], [Thermal resistance], [$unit("celsius per watt")$],
+  ),
+  caption: [Circuit and component parameters],
+) <table-circuit-and-component-parameters>